This unit was installed for an adhesive manufacturing factory. Steam capacity is 6 ton/hr burning wood chips. The package includes a paddle conveyor for feeding wood chips into the furnace.

This project involves the dismantling and reconstruction of Storage Tanks in a ‘live’ plant for a multi-national chemical company. The scope of work includes the following:

Three units of this silo was fabricated and supplied to a multi-national chemical plant in the east coast. SUN SUNG LEE ENGINEERING SDN. BHD. We provided the optimum design that afforded the customer more cost-effective solution. The works includes the following:

This vessel was supplied to a multi-national chemical plant as a buffer drum for hydrogen gas. Design and constructed to ASME codes, it measured 4,000 mm in diameter and is 18,000 mm in height. All welding seams were ground flush to eliminate stress concentration. It was transported to site by road.

SUN SUNG LEE ENGINEERING SDN. BHD. undertakes refurbishment of existing plant equipment. Here, a heat exchanger is being cleaned and checked for leaks. Worn down gasket faces is machined in-situ.

Here the internal of tubes being cleaned by a stainless steel brush on a flexible line. The whole length of the tube can be cleaned by this method. Various tool tips are used to cater for different conditions.

Fabricated products requiring sophisticated corrosion protection are cleaned by grit blasting in our painting yard before coating with epoxy finish.